The RDA Terminal will ring while you’re there, and Alexander Tremayne will be on the line. He’ll ask you to return to Hydro-Oil Extractor Alpha in order to recover data from the comms relays there.
So, the faster the copper coil rotates, the more electric current will be created. A generator is a device that converts mechanical energy into electrical energy. Generators do not produce electricity on their own, they must first collect mechanical energy from an outside source. How a generator works is easy to understand if you can understand each step below. Wind turbines work the opposite way that fans do– instead of using electricity to create wind, wind turbines use wind to make electricity. The wind turns the blades which spin a shaft that is connected to a generator and produces electricity. Wind energy is renewable and harnesses the energy generated by wind through the use of wind turbines that convert it into electricity.
This is akin to the fact that for air to flow from one location to another in a weather system, there must be a pressure difference between the two spots. (1) Point 1, from the figure above, is a spinning rotor that is attached to the turbine shaft. The main job of the rotor is to absorb the mechanical energy outside the generator, and use it to create rotational motion.
Motor/generators are really one device that can run in two opposite modes. Combustion gas turbines, which are similar to jet engines, burn gaseous or liquid fuels to produce hot gases to turn the blades in the turbine.
There’s a basic law of physics
called the conservation of energy that explains how you can get
energy—and how you can’t. According to this law, there’s a fixed
amount of energy in the universe and some good news and some bad news
about what we can do with it. The bad news is that we can’t create
more energy than we have already; the good news is that we can’t
destroy any energy either.
Low-Speed Shaft
This keeps both the charges equal, which, in turn, keeps the atom balanced. So, the positive charge on the proton is equal to the negative charge of electrons. Part of the turbine’s drivetrain, the low-speed shaft is connected to the rotor and spins between 8–20 rotations per minute. Part of the turbine’s drivetrain, turbine blades fit into the hub that is connected to the turbine’s main shaft. A substation links the transmission system to the distribution system that delivers electricity to the community.
When the field winding is rotated at a certain speed, its magnetic field spins past the (stationary) armature windings, thereby inducing voltages on the armature. If the generator is “open circuited”–meaning there are no connections to the armature windings–then the induced voltages appear on the generator terminals. The terms “wind energy” and “wind power” both describe the process by which the wind is used to generate mechanical power or electricity. This mechanical power can be used for specific tasks (such as grinding grain or pumping water) or a generator can convert this mechanical power into electricity. Other types of electricity generators include fuel cells, Stirling engines (used in solar thermal parabolic-dish generators), and thermoelectric generators.
Hack this to send the power to the east, and round by the explosive container. It doesn’t matter what order you do this in, just use SID to power up both relays after you activate the power. Weaker magnets will only produce a few hundredths of a volt when you move the magnet through the coil. A slightly thicker gage magnet wire will also help to produce a little more voltage.
As the rotor, shaft, and armature rotate, they move within the electric field created by the magnets. Hydrogen can be produced from a variety of resources, such as natural gas, nuclear power, biogas and renewable power like solar and wind. But it’s important to have different fuel sources and technologies to generate electricity to ensure a constant supply and are not overly reliant on one type of power generation.
